Komatsu's vulnerable parts of the motor should be used to avoid damage during use.
In the process of working, Komatsu Machinery needs to pay attention to the operation of the motor in Komatsu's vulnerable parts. Because we find that many users don't know much about the motor, then naturally it will not realize that the motor is used in Komatsu machinery. The seriousness caused by the damage occurred in the process. It is necessary to know that the application of Komatsu's fragile accessory motor in the baler is not trivial, so you should avoid damage to the motor during use.
▼Speed and pressure should not exceed the specified value. Exceeding the overheating of the Komatsu structure accessory motor, avoiding sudden start or stop under the condition of system load, sudden start or stop of the brake will cause pressure spike, pressure relief valve It is impossible to react so fast to protect the Komatsu structural accessory motor from damage.
▼ Generally, there should be sufficient back pressure on the oil return port of the Komatsu structure fitting motor. This should be the case for the inner curve motor. Otherwise, the roller may break off the surface and cause impact, which will generate noise, reduce the life, and crush the roller. The whole motor is damaged, and the back pressure is generally about 0.3 to 1.0 MPa. The higher the rotation speed, the higher the back pressure should be.
▼ Use a lubricant with good safety performance. The number of lubricant should be applied to a specific system. Checking the fuel volume of the fuel tank is a simple but important preventive measure. If the leak is not found or not repaired. Then the system will quickly lose enough hydraulic oil to create a vortex at the pump's population. Make the air breathable. Thereby causing damage.
▼ Keep the hydraulic oil as clean as possible. The quality of the hydraulic oil is hidden behind most of the Komatsu structural parts. The fault is mostly caused by solid particles (particles), pollutants and overheating, but water and air are important factors. .
▼Capture the fault signal and take timely measures. Small changes in sound, vibration and heat will mean that there is a problem with the Komatsu structural accessory motor. The sound of the click sound means there is a gap, and the bad bearing or sleeve may emit an unusual Humming and vibration at the same time. When the Komatsu structural accessory motor feels hot, then this significant heat rise indicates a fault, and a reliable indication of poor motor performance can be seen on the machine.
According to all the above contents, have you got a deeper understanding of the motor in Komatsu's vulnerable parts? If the content we share helps you, please stay tuned to our website, we will continue to update the news information for everyone, and strive to provide better service to customers.
